How to Bypass PIN Verification after Factory Reset without a Computer

Introduction

After performing a factory reset on your device, it is necessary to verify the pin in order to ensure the security of your personal data and settings. However, there may be situations where you need to bypass the pin verification without a computer. This article will provide you with a step-by-step guide on how to bypass the pin after a factory reset without the need for a computer.

Bypass Verify Pin without Computer: Step-by-Step Guide

Here are the steps you can follow to bypass the verify pin after a factory reset without using a computer:

1. Restart your device: Start by restarting your device. This step is important as it allows you to enter certain key combinations during the booting process.

2. Boot into recovery mode: Depending on the make and model of your device, the key combination to enter recovery mode may vary. In most cases, you can do this by pressing and holding a combination of volume up, home, and power buttons simultaneously.

3. Navigate through the recovery menu: Once you have entered recovery mode, use the volume up and down buttons to navigate through the options. Look for an option that says “Wipe data/factory reset” or something similar. Use the power button to select this option.

4. Confirm the reset: After selecting the “Wipe data/factory reset” option, you will be asked to confirm your choice. This step is crucial as it erases all the data on your device. Use the volume buttons to navigate to the “Yes” option and press the power button to confirm.

5. Reboot your device: After the factory reset is complete, navigate to the option that says “Reboot system now” using the volume buttons. Press the power button to reboot your device.

6. Set up your device: When your device restarts, you will be taken to the initial setup screen. Follow the on-screen instructions to set up your device, including setting a new pin.

Conclusion

Bypassing the pin verification after a factory reset without a computer can be useful in certain situations. However, it is important to note that bypassing the pin can pose security risks and should only be done if absolutely necessary. It is always recommended to follow proper security measures and keep your device protected.

By following the step-by-step guide provided in this article, you can successfully bypass the verify pin after a factory reset without the need for a computer. Make sure to consider the implications and risks involved before proceeding with the bypass process.

Option 1: Using a SIM Card

When you find yourself locked out of your device after a factory reset and you don’t have access to a computer, there are still a few options you can try to bypass the verify PIN screen. One of these options is using a SIM card. This method may work on certain devices, but keep in mind that it might not be applicable to all models.

To begin, you will need access to another phone with a SIM card that is compatible with your locked device. Here is the step-by-step process:

Step 1: Insert the SIM card into your locked device

Start by turning off your locked device and removing its back cover. Locate the SIM card slot and carefully insert the SIM card from the other phone into your locked device. Make sure the SIM card is properly inserted and securely in place.

Step 2: Restart your device

Once the SIM card is inserted, put the back cover back on your device. Then, power on your locked device by pressing the power button. It should boot up normally, but this time it may prompt you for the SIM card’s PIN or unlock code.

Step 3: Use the SIM card’s PIN to bypass verify PIN screen

Enter the PIN or unlock code associated with the SIM card that you inserted into your locked device. If the PIN or unlock code is correct, your locked device should bypass the verify PIN screen and grant you access to the device’s interface.

Please note that this method may not work on all devices or situations. It highly depends on the device’s compatibility with different SIM cards, as well as the specific security measures implemented by the manufacturer. Additionally, using someone else’s SIM card means you are temporarily swapping phone numbers, so keep this in mind during the process.

Option 2: Using Google Account Verification

If you have previously set up a Google account on your device, you can use this method to bypass the verify pin after factory reset without a computer. This method involves using the Google account associated with your device to verify your identity and unlock your phone.

Here is a step-by-step guide on how to utilize the Google account verification method:

Step 1: Enter the wrong PIN

After performing a factory reset on your device, you will be prompted to enter your pin to gain access to your phone. In this step, intentionally enter the wrong PIN multiple times until you see a message that says “Too many attempts” or something similar.

Step 2: Tap on ‘Forgot Pattern/Password’

Once you receive the “Too many attempts” message, look for an option that says “Forgot Pattern” or “Forgot Password.” Tap on this option to proceed.

Step 3: Sign in with your Google account

In this step, you will be prompted to sign in with the Google account that is associated with your device. Enter the email address and password that you used when setting up the Google account.

If you do not remember your Google account credentials, you can click on the “Forgot email?” or “Forgot password?” links to recover your account information.

Step 4: Create a new PIN

After successfully signing in with your Google account, you will be prompted to create a new PIN for your device. Choose a PIN that is easy to remember but also secure.

Once you have created a new PIN, confirm it, and save the changes. Your device will now be unlocked, and you can access all the features and data on your phone.

It is worth mentioning that the Google account verification method may not work on all devices, especially if you have not previously set up a Google account on your phone. In such cases, you may need to consider other methods or seek professional assistance to bypass the verify pin after factory reset.

Remember to use the Google account verification method responsibly and only on devices that you own or have legal permission to unlock. It is important to respect the privacy and security of others.

Option 3: Using a Custom Recovery

If you’re looking for an alternative method to bypass the verify pin after a factory reset without a computer, using a custom recovery can be a viable option. Custom recoveries like TWRP (Team Win Recovery Project) or CWM (ClockworkMod) provide a range of features and functionalities beyond what the stock recovery offers. Although this method requires some technical knowledge, it can be an effective solution for bypassing the verify pin.

Here are the steps involved in using a custom recovery to bypass the verify pin after a factory reset:

Step 1: Boot into Recovery Mode

The first step is to boot your device into recovery mode. The process may vary slightly depending on your device, but generally, you can follow these instructions:

1. Turn off your device completely.
2. Press and hold the power button, volume up button, and home button simultaneously.
3. Release the buttons when the device logo appears.
4. You will now enter the custom recovery interface.

Step 2: Backup and Wipe Data

Once you are in the custom recovery interface, it is highly recommended to perform a backup of your data to prevent any loss.

1. Using the volume buttons, navigate to the “Backup” or “Backup and Restore” option and select it.
2. Choose the partitions you want to back up and follow the on-screen instructions to complete the backup process.
3. After the backup is complete, go back to the main menu of the custom recovery.
4. Navigate to the “Wipe” or “Factory Reset” option and select it.
5. Confirm the wipe operation and wait for the process to finish.

Step 3: Install ROM or Custom Firmware

Now that you have wiped the data, you will need to install a custom ROM or firmware that includes the necessary files to bypass the verify pin. You can find custom ROMs for your specific device on various online forums and websites.

1. Connect your device to a Wi-Fi network (if available) to ensure a stable internet connection.
2. Navigate to the “Install” or “Install ZIP” option in the custom recovery menu.
3. Select the custom ROM or firmware file you downloaded earlier.
4. Follow the on-screen instructions to install the custom ROM or firmware.
5. After the installation is complete, go back to the main menu of the custom recovery.

Step 4: Reboot and Verify

Once you have successfully installed the custom ROM or firmware, it’s time to reboot your device and verify if the verify pin bypass is successful.

1. Navigate to the “Reboot” or “Reboot System” option in the custom recovery menu.
2. Your device will now reboot and start up with the newly installed custom ROM or firmware.
3. During the initial setup process, you should be able to bypass the verify pin and access your device without entering the pin that was previously required.

Please note that the steps provided here are general guidelines, and the actual process may vary depending on your device and the custom recovery you are using. It’s always a good idea to refer to the specific instructions provided by the custom recovery developer or the ROM/firmware developer for your device.

Using a custom recovery to bypass the verify pin after a factory reset without a computer can be a complex process and may void your device’s warranty. It is crucial to proceed with caution and ensure you fully understand the risks involved before attempting this method. If you are unsure, it’s recommended to seek professional assistance or consider alternative solutions.

Option 1: Use a SIM Card

One possible method to bypass the verify pin after factory reset without a computer is by using a SIM card. This option is mainly applicable to devices that have SIM card slots.

To utilize this method, you need to insert a SIM card into your device. Then, when prompted to enter the PIN, enter an incorrect PIN several times. After a few unsuccessful attempts, your device will prompt you to enter your Google account credentials to verify your identity. If you correctly enter your Google account information, your device will unlock, and you will be able to bypass the verify pin screen.

Alternatively, if your device is linked to a Samsung account, you can try using the Find My Mobile service from Samsung to remotely unlock your device.

Option 2: Utilize Google’s Find My Device

If you have previously set up Google’s Find My Device feature on your device, you can make use of it to bypass the verify pin after factory reset. This method is effective for devices running Android versions 7.1.1 and below.

To perform this method, log in to the Google account associated with your locked device on another device. Open Google’s Find My Device website or use the Find My Device app. Select your locked device from the list and click on the “Lock” option. Follow the instructions to create a temporary password. Enter this temporary password on your locked device, and it will unlock, allowing you to bypass the verify pin screen.

Option 3: Factory Reset Protection (FRP) Bypass

If you have forgotten your password after a factory reset, the Factory Reset Protection (FRP) Bypass method can be used to bypass the verify pin screen. However, this method requires careful attention and patience.

To execute this method, you need to perform a series of steps involving the Google account linked to your locked device. These steps usually involve entering specific codes or using a combination of button presses to access device settings and disable FRP.

It’s important to note that the FRP Bypass method may not work on all devices and software versions. Additionally, it is recommended to use this method responsibly and only on devices that you legally own.

Option 4: Seek Professional Help

If you are unable to bypass the verify pin after factory reset without a computer using the above methods, or if you are uncomfortable attempting these methods yourself, seeking professional help is a viable option.

Professional technicians or authorized service centers have the knowledge and tools to help bypass the verify pin screen on your device. They can provide expert assistance and eliminate any risks or potential damage that may occur from attempting to bypass the verify pin screen without proper expertise.

Option 5: Exercise Caution and Responsibility

When attempting to bypass the verify pin after factory reset without a computer, it is essential to exercise caution and a sense of responsibility. These methods should only be used on devices that you legally own.

It’s important to understand the potential risks and consequences associated with bypassing security measures. Misusing these methods or attempting to manipulate someone else’s device without consent is considered unethical and may violate laws and regulations.

Remember to attempt these methods responsibly and within legal boundaries. Always respect others’ privacy and only bypass security measures on devices that you have legitimate access to.

Conclusion

When faced with the challenge of bypassing the verify pin after a factory reset without a computer, there are several options available. By using a SIM card, leveraging Google’s Find My Device feature, utilizing FRP Bypass methods, seeking professional help, and exercising caution and responsibility, you can increase your chances of unlocking your device successfully.

However, it’s crucial to remember that each method may have limitations and risks associated with it. It is always advisable to follow the appropriate guidelines and laws related to device security and personal privacy.